Bulk injectable thermoplastic polymers, ideal for aesthetic prosthetics, light and resistant, metal-free, with minimal shrinkage and excellent color stability.
Available in semi-rigid and acrylic versions, it can be used in partial and total dentures and to create prosthetic structures.
ACRYNEL DEFLEX
Injectable Acrylic
• Extra strength translucent acrylic;
• Minimal shrinkage;
• Adheres to acrylic;
Possibility of rebasing and additions using conventional materials and techniques.
Available colors
• MP – Medium Pink
• TR – Transparent
Injection Parameters
• Material: ACRYLENE
• Temperature: 265°C ± 10°C
• Injection time: 15 minutes
• Waiting time: 1 minute
• Air pressure: 6 kg/cm² ± 1 = 86 PSI ± 14
ACETAL DEFLEX
Injectable Acetal
• Partial denture structures and dental retainers.
Available colors
MP – Medium Pink
A2 | A3 | A3.5 | B3 | C3
Injection Parameters
• Material: ACETAL
• Temperature: 220 °C ± 5 °C
• Injection time: 15 minutes
• Waiting time: 1 minute
• Air pressure: 4.5 kg/cm² ± 0.5
DEFLEX TENAZ
Semi-Flexible Polyamide
• Highly resistant to breakage or deformation;
• Very fluid, easy injection;
• Translucency: medium;
Available colors
• MP – Medium Pink
Injection Parameters
• Material: TONGS
• Temperature: 260 °C ± 10 °C
• Injection time: 12 minutes
• Waiting time: 1 minute
• Air pressure: 4.5 kg/cm² ± 0.5 = 64 PSI ± 7
VERSATILE DEFLEX
Semi-rigid polyamide
• Total versatility: excellent balance of elasticity and resistance
• Allows all types of design. Occlusal supports can be made
• High translucency. Easy to polish
Available colors
• MP – Medium Pink
• TR – Transparent
Injection Parameters
• Material: VERSATILE
• Temperature: 275 °C ± 10 °C
• Injection time: 15 minutes
• Waiting time: 1 minute
• Air pressure: 4.5 kg/cm² ± 0.5 = 64 PSI ± 7
Basis ELAST YAMAHACHI
Injectable Thermoplastic Resin for Denture Base - New Rigid Type of NYLON
Nylon material with moderate elasticity, ideal for non-metallic staples
Advantages
Durability
• Excellent Color Stability
• High Stain Resistance
• High Dimensional Stability
Ease of Use
• Easy to Finish and Polish
• Excellent Fit
• Minimum Shrinkage
Properties
• Flexibility with Dynamic Resistance
• High Impact Resistance
• Low Water Absorption
Technical Description
Basis ELAST offers a balance between the strength of polycarbonate and soft nylon. This characteristic provides a physical advantage in terms of dimensional stability and high dynamic flexibility. Basis ELAST's hardness is similar to that of polycarbonate and soft nylon, resulting in excellent impact resistance. Its hardness is also greater than that of soft nylon—a physical advantage that facilitates polishing.
The stain resistance of Basis ELAST is significantly superior to that of soft nylon.
This ensures excellent chemical resistance and color stability.
Basis PC YAMAHACHI
Semi-Flexible Polycarbonate
Injectable Thermoplastic Resin for Dental Prosthesis Base
Features
• Balanced Resistance
• Semi-Flexible
• Excellent Stain Resistance
• Exceptional Water Absorption
• Superior Durability
• Possibility of Repair
Physical Properties
• Flexural Strength (MPa): 95
• Flexural Modulus (MPa): 2076
• Vickers hardness (Hv): 12.6
• Stain Resistance:
- Reflectance, ΔE 0.8
- Transmittance, ΔE 0.5
• Elasticity (mm): 6.9
• Impact Resistance (kJ/m²): 16.0
• Absorption (μg/mm³): 4.3
• Solubility (μg/mm³): 0.1